Epson 386-25 Benutzerhandbuch

5.

Copy to the GEM_DRIVRPK diskette all of the display

driver files that you copied to your hard disk in step 2. The
filenames of the display drivers are listed at the beginning of

this section. Use the MS-DOS COPY command to copy the
files.

6.

Remove the GEM_DRIVRPK diskette and insert the
GEM 2.2 System Master Disk in drive A.

7.

Log onto drive A, type the following, and press 

Enter:

SCRNSTAL C:

8.

Follow the instructions in your GEM documentation and on
the screen to finish the installation. You’ll choose the
appropriate driver from one of the GEM menus. You may

need to insert the original GEM device driver disk as well as

the GEM_DRIVRPK diskette you created.

Note

If you have installed GEM 2.2 and you want to change to
another display driver, have the GEM_DRIVRPK diskette
ready, and then start from Step 6 to change the driver.

Epson provides GEM 3.0 drivers for the following resolutions:

❏

640 

480, 16-color graphics (SDV1480.VGA)

❏

800 

600, 16-color graphics (SDV1600.VGA)

❏

1024 

768, 16-color graphics (SDVl768.VGA)

❏ 640 

400, 256-color graphics (SDV2400.VGA)

❏ 640 

480, 256-color graphics (SDV2480.VGA).