Epson 386-25 Benutzerhandbuch

Follow these steps to install the hard disk drive in the vertical
mounting position:

1.

Locate the hard disk drive ribbon cable that came in the box
with your computer. It is a flat cable with three connectors

on it (one on each end and one in the middle).

Use the connector in the middle of the cable. As shown

below, there are two rows of holes in the end of the

connector. One of the holes is blocked with a plug.

The ribbon cable socket on the back of the drive has two

rows of pins. In one of the rows, a pin is missing.

ribbon cable connector

blocked hole

ribbon cable socket

missing pin