Epson 386-25 Benutzerhandbuch

Your Equity 386/25 PLUS probably came with one factory-

installed diskette drive. If you added a second diskette drive or

removed one, you may need to change the diskette drive settings

to match your configuration. If you haven’t made any changes,

you can verify your drive type settings. Follow these steps:

1. 

At the main menu, highlight 

Diskette drive.The

current settings appear:

Drive A:

1.2 MB

Drive B:

None

If the diskette drive types on the screen match your diskette

drive configuration, you can skip the rest of this section.

2.

To change a setting, press 

Enter. 

The cursor block moves

into the diskette drive submenu and you see the following:

Not

installed

360 KB drive

720 KB drive (3.5")

1.2 MB drive

1.44 MB drive (3.5")

You also see the 

message 

Selected drive light

i s

ON. 

This tells you that the light on the diskette drive

currently selected is on.

3.

If you want to change the drive A settings, be sure

Drive A: 

is highlighted and press 

Enter. 

If you want to

change the drive B settings, highlight 

Drive B 

: and

press 

Enter. 

The cursor block moves into the submenu.

2-26

Running the Setup Program