Epson powerlite 505c Benutzerhandbuch

Refer to the following table for a complete description of the 
projector’s status lights and their meaning:

orange

The projector is in sleep mode. You can unplug it or press the Power 
button to turn it on.

flashing green

The projector is warming up. Wait for the image to appear.

green

The projector is operating normally.

flashing orange

The projector is cooling down. You can’t turn it back on (and you 
should not unplug it) until the light stops flashing and remains orange. 

flashing red

Power is cut off because of an internal problem. Remove the power 
cord and contact EPSON for help.

red

The lamp is burned out. Replace it as described on page 86.

flashing orange

The lamp is almost burned out. This is a good time to replace it. See 
page 86 for instructions.

flashing red

There is a problem with the lamp. If necessary, replace the lamp as 
described on page 86.

flashing orange

The projector is in a high-temperature cooling cycle. Make sure the 
temperature surrounding the projector does not exceed 104 

°

F and 

there is plenty of space around and under the projector for ventilation. 
Clean the air filter if necessary. See page 85 for instructions.

red

The projector has overheated and turned itself off. Let it cool for a few 
minutes, then turn it back on. Make sure there is plenty of space 
around and under the projector for ventilation. If it continues to 
overheat, you may need to change the air filter. See page 85 for 
instructions.

flashing red

There is a problem with the cooling fan or temperature sensor. Turn 
off the projector and unplug it. Contact EPSON for help.