Epson Stylus Photo RX620 Benutzerhandbuch

Before using your Epson Stylus Photo RX620, read and follow these safety instructions: 

■

Be sure to follow all warnings and instructions marked on the Stylus Photo RX620.

■

Use only the type of power source indicated on the Stylus Photo RX620 label.

■

Connect all equipment to properly grounded power outlets. Avoid using outlets on 
the same circuit as air control systems or other high-load devices that regularly switch 
on and off.

■

Place the Stylus Photo RX620 near a wall outlet where the plug can be easily 
unplugged.

■

Do not let the power cord become damaged or frayed.

■

If you use an extension cord with the Stylus Photo RX620, make sure the total 
ampere rating of the devices plugged into the extension cord does not exceed the 
cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged 
into the wall outlet does not exceed the wall outlet’s ampere rating.

■

Avoid electrical outlets controlled by wall switches or automatic timers.

■

Keep your Stylus Photo RX620 and computer system away from potential sources of 
electromagnetic interference, such as loudspeakers or cordless telephone base units.

■

Avoid locations that are subject to rapid changes in heat or humidity, shocks or 
vibrations, or dust.

■

Leave enough room around the Stylus Photo RX620 for sufficient ventilation.

■

Do not place the Stylus Photo RX620 near a radiator or heating vent or in direct 
sunlight.

■

Place the Stylus Photo RX620 on a flat, stable surface that extends beyond its base in 
all directions. It will not operate properly if it is tilted or at an angle. Leave enough 
space in front of the Stylus Photo RX620 (at least 9 inches) so it doesn’t tip forward 
and fall off of the work surface.

■

Turn off and unplug the Stylus Photo RX620 before cleaning. Clean with a damp 
cloth only. Do not spill liquid on it.

■

Always turn the Stylus Photo RX620 off using the P On button. Don’t turn off 
the power using a switch on a power strip or unplug the Stylus Photo RX620 until 
the P On light and LCD panel turn off.