Epson ES-800C Benutzerhandbuch

Your computer has several standard option slots that can

accommodate either the Adaptec SCSI or the bidirectional

parallel adapter card. You can install the interface card in any

available slot. See your computer manual for detailed

installation instructions or follow these general steps:

1. Remove any retaining screws from the metal option slot cover

and remove the slot cover. Keep the screw(s) to secure the

option card to the computer. Store the slot cover in a safe

place in case you remove the interface card later.

2. Grip the interface card firmly by the top corners and make

sure the connector points down.

3. Insert the card into the slot, guiding it straight down. Once

the connector reaches the slot, push the card down firmly

(but carefully) to insert it fully. You should feel the card fit

into place.

4. Secure the end of the card to the back of the computer with

the retaining screw(s).

Follow these steps to replace your computer’s cover:

1. Replace the cover. (If you need instructions, see your

computer manual.)

2. Reconnect the computer’s power cable to the back panel and

then to an electrical outlet. Also reconnect any cables you

disconnected, including the keyboard cable.