Sony Ericsson S500 Benutzerhandbuch
4
Getting started
Getting started
Assembly, SIM card, battery, turning
on, help, calls
on, help, calls
Assembly
Before you start using your phone, you
need to insert a new SIM card and the
battery.
need to insert a new SIM card and the
battery.
SIM card and battery
To insert SIM card and battery
1
Turn off the phone. Remove the battery
cover by sliding the battery release
latch down.
cover by sliding the battery release
latch down.
2
Slide the SIM card into its holder with
the contacts facing up.
the contacts facing up.
3
Insert the battery with the label side up
and the connectors facing each other.
and the connectors facing each other.
4
Slide the battery cover into place.
Battery
To charge the battery
1
Connect the charger to the phone.
Wait approximately 2.5 hours or
until the battery icon indicates a full
charge before removing the charger.
Wait approximately 2.5 hours or
until the battery icon indicates a full
charge before removing the charger.
2
Remove the charger plug by pulling
up and out.
Some functions use more battery
power than others and may require
more frequent recharging. If talk
time or stand-by time becomes
noticeably shorter, replace the battery.
Only use approved batteries from
Sony Ericsson
up and out.
Some functions use more battery
power than others and may require
more frequent recharging. If talk
time or stand-by time becomes
noticeably shorter, replace the battery.
Only use approved batteries from
Sony Ericsson
Do not connect the charger unless the
battery is inserted.
battery is inserted.
≈ 2.5 h.
This is the Internet version of the User's guide. © Print only for private use.