AVerMedia Technologies TVBoxTM 5 Benutzerhandbuch
User Manual
11
Main Menu
On Screen Display
Usage
TV SOURCE
)
Use the CH▲ or CH▼ buttons to
select between antenna TV or
cable TV source, then press
Vol► button to make the
selection.
select between antenna TV or
cable TV source, then press
Vol► button to make the
selection.
CH FINETUNE
If the TV reception is not clear,
choose CH FINETUNE then
press Vol◄ and Vol► buttons
until the TV picture becomes
clear.
choose CH FINETUNE then
press Vol◄ and Vol► buttons
until the TV picture becomes
clear.
CH SCAN
)
Use the CH▲ or CH▼ buttons to
select either CH SCAN or All
FREQ SCAN, then press Vol◄
button to make the selection. If
you want to interrupt or cancel the
scanning process, press the
MENU button. Only those
channels scanned prior to
interruption or cancellation will be
memorized.
select either CH SCAN or All
FREQ SCAN, then press Vol◄
button to make the selection. If
you want to interrupt or cancel the
scanning process, press the
MENU button. Only those
channels scanned prior to
interruption or cancellation will be
memorized.
These two types of channel-
preset functions recall all active
channels in your area.
preset functions recall all active
channels in your area.
Use the CH SCAN function first.
If there are channels missing after
you perform CH SCAN, use the
ALL FREQ SCAN function and
repeat the searching process.
If there are channels missing after
you perform CH SCAN, use the
ALL FREQ SCAN function and
repeat the searching process.
NOTE: ALL FREQ SCAN is a
very time consuming process. If
the default frequency table
already includes all active TV
channels in your area, then you
do not need to use the ALL FREQ
SCAN.
very time consuming process. If
the default frequency table
already includes all active TV
channels in your area, then you
do not need to use the ALL FREQ
SCAN.