Epson EB-S6 Benutzerhandbuch

Installation Methods

The projector supports the following four different projection methods.
Install according to the conditions of the installation location.

Warning

• A special method of installation is required when suspending the

projector from a ceiling (ceiling mount). If it is not installed
correctly, it could fall causing an accident and injury.

• If you use adhesives on the ceiling mount to prevent the screws

from loosening, or if you use things such as lubricants or oils on
the projector, the projector case may crack causing it to fall from
its ceiling mount. This could cause serious injury to anyone under
the ceiling mount and could damage the projector.
When installing or adjusting the ceiling mount, do not use
adhesives to prevent the screws from loosening and do not use oils
or lubricants and so on.

Attention

Do not use the projector on its side. This may cause malfunctions to
occur.

• Project images from front of

the screen. (Front projection)

• Project images from behind a

translucent screen. (Rear
projection)

• Suspend the projector from

the ceiling and project images
from front of the screen.
(Front/Ceiling projection)

• Suspend the projector from

the ceiling and project images
from behind a translucent
screen. (Rear/Ceiling
projection)

• An optional ceiling mount is required when suspending

the projector from a ceiling.

p.97

• You can change the setting as follows by pressing down the

[A/V Mute] button on the remote control for about five
seconds.
"Front"

"Front/Ceiling"

Set "Rear" or "Rear/Ceiling" in the configuration menu.

p.44