AVerMedia Technologies averdigi eb1304 Benutzerhandbuch

 

37 

 

Select the camera and adjust the Brightness, Contrast, Hue and Saturation of 
the selected camera. 

Set the video value back to default 

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

 

Enable/disable the channel number to record video

 

i

 

The channels which could be recorded should be enabled in the 
CAMERA SELECT first. 

Select D1/CIF recording mode. Under D1 mode, the video recording is in full 
screen resolution. Each channel is recorded at a maximum frame rate of 15fps. 
You can switch to view the video in single full screen or 4 split screen. Whereas 
in CIF mode, video recording is at a lower resolution, but each video is recorded 
in 30fps/25fps (NTSC/PAL).   

Set the number of frames per second to be recorded. Refer to the table below 
for the available record frame rate settings. The higher the frame rate is, it uses 
more hard disk space 

Video Standard 

Record Mode 

D1 

60, 20, 4 

48, 20, 4 

CIF 

120, 60, 40, 20, 4 

100, 48, 20, 4 

Select the video quality setting from BEST, HIGH, MEDIUM, GOOD, NORMAL