Adam Equipment 302666242 Benutzerhandbuch
© Adam Equipment Company 2011
Page
18
6.3.4 Count pre-set or check-weighing
Check-weighing (or Count Pre-setting) is a procedure to cause an alarm to
sound when the net weight (or the number of items) on the scale meets or
exceeds a number stored in memory. The value to be stored is entered from
the keyboard.
sound when the net weight (or the number of items) on the scale meets or
exceeds a number stored in memory. The value to be stored is entered from
the keyboard.
SETTING OF PRESET LIMITS
It is possible to set a high and low limit for either counting or weighing (using
net weight). When the [Pst] key is pressed the user can select either
counting or weighing and then set the lower and upper limit.
For example:
net weight). When the [Pst] key is pressed the user can select either
counting or weighing and then set the lower and upper limit.
For example:
ACTION
DISPLAYS
Press [Pst]
“CHECk ” “ nEt “ “ “
if currently in the weighing mode
Press
[U.Wt/Units]
[U.Wt/Units]
“CHECk ” “ CoUnt “ “ “
to toggle from weighing to
counting
Press [Print]
“Hi cnt” “0.3 2 3 4” “ ”
The current high count limit is
displayed, press [CE] to clear and change if needed.
If using net weight the display will show
If using net weight the display will show
“Hi WEG”
Press [Print]
“lo cnt” “0.0 2 3 4” “ ”
The current low count limit is
displayed, press [CE] to clear and change if needed.
If using net weight the display will show
If using net weight the display will show
“Lo WEG”
Press [Print]
Return to weighing with limits set.
•
Clearing of either or both the limits is allowed. Both limits cleared will
disable the Preset altogether.
•
If Preset Weight was selected the first display would show “
Hi WEG
” and
“
Lo WEG
”.
•
The beeper will work as described in the Beeper Parameter.