Epson A883021 Benutzerhandbuch

L

Proof Sign-off:
BLE H.Kato E.Omori
F.Fujimori
SEI M.Kauppi

A5 size

TRBLE.FM

2/14/00

Pass 3

Make sure your camera has a memory card 
installed. If not, turn off the camera, insert the 
memory card in your camera, then turn the 
camera’s dial switch to 

.

Check that the port to which your camera is 
connected is properly configured, and that the 
Base I/O port address and the Interrupt Request 
Number (IRQ) assigned to the port are not in 
conflict with other devices.

If you are using a Macintosh and serial cable, and 
the camera is sharing a serial port with another 
device, make sure AppleTalk is inactive.

If you are using a Macintosh and a USB cable, 
make sure the USB driver file of your camera is 
active.

Make sure the cable is connected correctly, as 
described in “Connecting the Camera to Your 
Computer” on page 1-1.

Make sure the camera’s dial switch is set to 

. 

When you use the Controls menu, make sure to 
set the dial switch to 

 or 

. If your camera is 

the PhotoPC 800, open the lens cover.

Make sure the batteries have enough power and 
are installed correctly.

Make sure the computer has enough memory and 
disk space.

Check the port settings on the Setup menu of your 
EPSON Photo!3 software. You may need to 
change the Port and Speed connection settings to 
Auto. See “Changing computer connection 
settings” on page 2-19 for details.

Avoid opening or working with applications 
unrelated to the photo transfer process while the 
camera and computer are communicating.

Note:
❏

❏