Technicolor - Thomson dge505n Benutzerhandbuch

1. Remove the battery compartment cover on the back of the remote.

2. Insert new batteries. Match the polarities (+ and –) on the batteries with the diagram on the remote.

3. Put the battery compartment cover back on the remote.

• If you’re not going to use the remote for a month or more, be sure to remove the batteries because they can leak

and cause damage.

• Dispose of batteries in the proper manner, according to federal, state, and local regulations.

• Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly, if all batteries are not

replaced at the same time, if disposed of in fire, or if an attempt is made to charge a battery not intended to be
recharged.

• Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal injury.

When you want the remote to operate the DVD Player, point the remote at the DVD Player, not the TV. The remote has
to be pointed in the correct direction and toward the correct component in order for the remote control’s signal to
communicate with the sensor on the component. Make sure there is a clear path between the remote control and the
component you want to operate, so the signal isn’t blocked.

1. Turn on your TV and tune it to the correct Video Input Channel (if you don’t know which channel is  your the

Video Input channel, go to page 54 for help).

2. Press the ON•OFF button to turn on the DVD Player.

3. The first time you turn on your DVD player, the Language menu appears. 

If you want the DVD player’s menus to appear in English, press the OK button on the remote control. If you prefer

another language, press the arrow down button until that language is highlighted. Press OK to select the language.

15909540 FINAL  7/25/02  8:11 AM  Page 8