Star Micronics TCP400 Series Benutzerhandbuch

– 2 –

8.  Do not obstruct the insertion or discharge path of the cards.

9.  Do not cut the power while a card is being processed.

10. In case of reader/writer error (abnormal sounds, abnormal odors, smoke, fire) turn

off the reader/writer immediately and unplug it from the power outlet.

11.  Always hold the plug to unplug the power cord from its outlet. Pulling on the cord

will damage the cord.

12. When disconnecting use for prolonged periods, always remove the power plug from

the outlet.

13. Do not use the reader/writer in an environment where condensation has formed.

14. To  ensure  reader/writer  reliability,  clean  the  reader/writer  everyday,  or  when  the

cleaning lamp has lit.

15. Avoid contact with the optional cleaning liquid. If it gets in your eyes, or is ingested,

seek immediate medical assistance.

16. Do not disassemble or modify the reader/writer.

17. Do not expose cards to direct sunlight or fluorescent lights for extended periods of

time.

18. If a card is to be reprinted, allow for at least three minutes between prints.

When printing repeatedly to different cards, no wait is required.

19.

This symbol is placed near the thermal print head and erase head to indi-
cate that it may be hot.

Never  touch  the  thermal  print  head  and  erase  head  immediately  after  the  printer
has been used. Let the thermal print head and erase head cool for a few minutes
before touching it.

20.

This symbol is placed near the thermal print head and erase head to indi-
cate that it is easily damaged.

Observe the precautions for handling electrostatic sensitive devices.

21. Be careful not to drop paper clips, pins or other foreign matter into the unit as these

cause the reader/writer to malfunction.

22. Do not open the cover while operating.

23. The reader/writer is equipped with a DC motor or switches which use electrical con-

tacts. Plese avoid using the reader/writer in an area where silicon gas is present.