Technicolor - Thomson 2 8 w s 2 3 u Benutzerhandbuch
Set the remote control to
VCR.
VCR.
Selecting appliances con-
nected to the VCR (AV1,
AV2...)
nected to the VCR (AV1,
AV2...)
To change programme
These buttons have the
same functions as some of
those on your video
recorder remote control (if
it is from our brand)
same functions as some of
those on your video
recorder remote control (if
it is from our brand)
To switch your video
recorder on or off
recorder on or off
Go to programmes and
enter numerical values
enter numerical values
in
menus
VCR functions
(rewind, play, forward, ...)
(rewind, play, forward, ...)
Remote control
Video Recorder Functions
You can use your remote control for some functions on most brands of video recorders. Before
using it, you must enter the code of your video recorder in the table on the next page, following the
adjustment procedure described below.
using it, you must enter the code of your video recorder in the table on the next page, following the
adjustment procedure described below.
You may find that this remote control is not compatible with your brand of video recorder or
that some functions are not available.
that some functions are not available.
Entering your code
Using the Video Recorder
1.
Set the remote control to VCR.
2.
While holding down the
but-
ton enter a 3-digit code correspon-
ding to the brand of your video recor-
der.
ding to the brand of your video recor-
der.
3.
Release the
button
4.
Switch off your video recorder by
pressing the
pressing the
button
5.
If the VCR does not switch off, try
one of the other codes correspon-
ding to your video recorder.
one of the other codes correspon-
ding to your video recorder.
When you change the bat-
teries, you will have to
enter the maker’s code
again
teries, you will have to
enter the maker’s code
again