Ariston a1235 Benutzerhandbuch

●

Turn off the water tap after every wash. This will 
limit the wear of your appliances water system 
and also prevent leaks.

●

Unplug your appliance when cleaning it and 
during all maintenance operations.

The exterior and rubber parts of your appliance can
be cleaned with a soft cloth soaked in lukewarm
soapy water. Do not use solvents or abrasives.

Remove the dispenser by
raising it and pulling it out
(see figure).
Wash it under running
water; this operation
should be repeated 
frequently.

●

Always leave the appliance door ajar to prevent 
unpleasant odours from forming.

Check the water inlet hose at least once a year. If
you see any cracks, replace it immediately: during
the wash cycles, high water pressure could cause a
cracked hose to split open.

! Never use hoses that have already been used.

Your appliance comes fitted with a plug and a 13
amp (13A) fuse. If you need to replace the fuse,
use only those rated at 13 amp (13A) and ASTA
approved to BS1362. To change the fuse, insert the
fuse and push the fuse holder down into the locked
position. Correct replacement is identified by colour
coding or the marking on base of the plug.

! DO NOT use the plug unless the fuse holder is in
the locked position and the top cover firmly
replaced.

If you need to change your plug, if it does not fit
your socket: isolate the machine from the mains
supply. Cut off the supplied plug and safely dispose
of the discarded plug. DO NOT plug into any other
socket.

NOTE: If you change the plug, the colour of wires in
the mains lead may not match the colour of the
markings which show the different terminals in the
plug. You must wire it as shown below:

Green and Yellow (Earth)

13A ASTA approved fuse to

wire to terminal marked ‘E’,

BS1362.

symbol     , or coloured
green and yellow.

Blue (Neutral) wire to
terminal marked ‘N’ or

Brown (Live) wire to terminal

coloured black.

marked ‘L’ or coloured red.

10