HP Compaq KB-9965 311059-B41 Benutzerhandbuch

 

 

  Do not force the processor into the processor socket. The processor pins are 

fragile, and the processor socket is keyed to ensure proper installation. 

 

  When inserting a processor into a socket, determine the correct processor orientation by 

observing the keyed configuration of both the processor socket and the processor pins. 

To remove a non-hot-plug expansion board: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

4.  Disconnect the cables from the expansion board. 

5.  Press the PCI-X retaining clip, releasing one side of the board.