Telex SS-1002 Benutzerhandbuch
16
To adjust sidetone on SS-2002 and SS-2002RM headphones, do the following:
1.
Activate channel 1.
2.
Activate talk and listen.
3.
Set the volume control to the normal listening level for intercom audio.
4.
While talking into the microphone, use a small, flat-head screwdriver to adjust the channel 1 sidetone trimmer so
you can hear your own voice in the headphones at an acceptable level.
you can hear your own voice in the headphones at an acceptable level.
5.
Activate channel 2.
6.
Repeat the steps 1 - 5 to adjust the channel 2 sidetone.
Channel Select (SS-2002 & SS-2002RM Only)
To select a channel on the SS-2002 and SS2002RM, do the following:
>
Tap the Ch Select key to select channel 1 or 2.
The key is green when channel 1 is selected and red when channel 2 is selected.
The key is green when channel 1 is selected and red when channel 2 is selected.
Headset/Headphone/Speaker/Microphone Selection
•
To use a headset or telephone style handset:
set the Speaker and Panel Mic keys to off.
•
To use headphones with the built-in panel microphone:
set the speaker key to off.
set the panel mic key to on.
make sure a gooseneck microphone is not inserted in the panel microphone connector.
set the panel mic key to on.
make sure a gooseneck microphone is not inserted in the panel microphone connector.
•
To use headphones with a gooseneck microphone,
set the speaker key to off.
set the panel mic key to on.
make sure a gooseneck microphone is inserted in the panel microphone connector.
set the panel mic key to on.
make sure a gooseneck microphone is inserted in the panel microphone connector.
•
To use the speaker with a handheld dynamic microphone:
set the speaker key to on.
set he panel mic key to off.
set he panel mic key to off.
•
To use the speaker with the built-in panel microphone:
set the speaker and panel mic keys to on.
make sure a gooseneck microphone is not inserted in the panel microphone connector.
make sure a gooseneck microphone is not inserted in the panel microphone connector.
•
To use the speaker with a gooseneck microphone:
set the speaker and panel mic keys to on.
make sure a gooseneck microphone is inserted in the panel microphone connector.
make sure a gooseneck microphone is inserted in the panel microphone connector.
Receiving Calls
When there is an incoming call signal, the call key flashes red. There is a beep tone in the headphones or speaker if the beep
feature is activated.
feature is activated.
NOTE:
The incoming call indication is provided only for the currently selected intercom channel in the case of SS-2002
& SS-2002RM models.
To receive calls, do the following: