Epson professional series ii Benutzerhandbuch

To connect two monitors to the video interface on your

computer, follow the steps below. If you want to connect three

monitors to the video interface, you can follow these steps, but

first see “Connecting three monitors” on page 15.

1. Make sure your monitors, the computer, and all other

peripheral devices are turned off.

2. If one monitor is already connected to your computer,

unplug its power cord from the electrical outlet and the AC

power inlet. Then disconnect the video interface cable(s)

from the monitor and the computer.

3. Connect each of the five T connectors to the first monitor’s

five BNC connectors, as shown below. To do this, align the

cutouts in the T connector with the tabs on the monitor

connector and plug in the T connector. Then push it in
while turning it clockwise as far as possible until it fits in
place.

tab