Epson professional series ii Benutzerhandbuch

To maximize the brightness of all the monitors you connect,

always set the 

 

switches to 

HIGH 

on all the monitors

except the last one and set the last monitor’s switch to 75R.

For example, if you connect three monitors to one video

controller, set the switches on the monitors as shown below.
If one of the monitors you are connecting does not have a

 

switch, it is probably permanently set to 7512; use

it only as the last monitor (monitor 3 below).

c o m p u t e r

monitor 1

monitor 2

monitor 3

9.

Plug each monitor’s power cord into the AC power inlet on

its back panel and then into a grounded (earthed) electrical
outlet.

To connect three monitors to one video interface, follow the

appropriate steps above as well as these general guidelines:

Connect T connectors to the BNC connectors on the first

and second monitors.

Connect the color-coded video interface cable to the
computer’s video interface and the appropriate
T connectors on the first monitor.

Use 

 video interface cables to connect the first monitor

to the second monitor and the second monitor to the third

monitor.

Set the monitors’ 

 

switches as described at 

the 

top

of this page.