Epson professional series ii Benutzerhandbuch

The Input select button allows you to change the monitor’s

video input setting to match the type of video input the
monitor is using. The monitor has two possible video input

settings: 

D-SUB 

or 

BNC. 

If your video interface cable is connected

to the monitor’s VGA connector, the video input setting should

be 

D-SUB. 

If your video interface cable(s) are connected to the

monitor’s BNC connectors, the video input setting should

be BNC.

The arrow at the right end of the LCD points to the current

video input setting. (If the LCD is off, press the Brightness or

Contrast button to turn it back on.) For example, 

in 

the

illustration below, the arrow points to 

D-SUB.

If the video 

input 

setting matches the type of video input the

monitor is using, the LCD displays the number of the current
video mode, such as Video Mode: 3, or Mode not found.

For example, if you connected your video interface cable to the

monitor’s VGA connector and the video input setting is D-SUB,
the arrow points to 

D-SUB, as shown 

above.

If the video input setting does not match the type of video
input the monitor is using, the LCD flashes the error message

INPUT SEL once to 

select the correct

video input setting. You briefly see the correct setting and then
the LCD displays 

the 

number of the current video mode or

If 

do not 

touch any control panel

buttons for 20 seconds, the monitor saves the new video input

setting.