Epson professional series ii Benutzerhandbuch

The monitor automatically selects which video mode to use. It

analyzes the signal input (the frequency and polarity of the
horizontal and vertical sync pulses) from the computer, checks
the video modes stored in its memory, and uses the most
appropriate mode. The signal input depends on the computer,
display adapter card, and application program you are using.

The sections below explain how to modify a video mode, recall

a factory-set video mode, and create a user-defined video

mode. For each mode, you can set any of the four display
parameters listed in the following table. Refer to this table as

you follow the steps below.

Horizontal

Centers the image horizontally. Press and hold down the

phase

side of the Adjustment button to move the image left, or the

Width

+ side to move the image right. 

Adjusts the width of the image. Press and hold down the
side of the Adjustment button to reduce the width of the

image, or the + side to increase its width. 

l