Tecumseh lh318sa-lh358sa (hmsk80-110) Benutzerhandbuch
181-1275-14
4-Cycle • Snow King Engine
Page 15
VI. Stopping Your Engine and
Short-Term Storage
Stop engine according to equipment manufacturer’s
instructions.
instructions.
To avoid unsupervised operation of
an engine, especially by children,
an engine, especially by children,
NEVER leave it unattended when it is running. Always turn
off the engine after use and remove ignition key, if
provided. Failure to do so may lead to serious injury or
death.
off the engine after use and remove ignition key, if
provided. Failure to do so may lead to serious injury or
death.
NEVER store engine with fuel in the
fuel tank inside a building with
fuel tank inside a building with
potential sources of ignition such as hot water or space
heaters, clothes dryers, electric motors, etc. Doing so may
lead to an explosion resulting in death or serious injury.
heaters, clothes dryers, electric motors, etc. Doing so may
lead to an explosion resulting in death or serious injury.
A. Stop Engine
NOTE
Run engine for a few minutes to help dry off any moisture on
engine before proceeding to Step 1.
engine before proceeding to Step 1.
1.
Move equipment control, if present (see manufacturer’s
instructions), engine control lever or ignition switch to
“STOP” or “OFF” position. See Figure 31.
instructions), engine control lever or ignition switch to
“STOP” or “OFF” position. See Figure 31.
To avoid unsupervised operation of an
engine, especially by children,
engine, especially by children,
NEVER leave it unattended when it is running. Always turn
off the engine after use and remove ignition key, if provided.
Failure to do so may lead to serious injury or death.
off the engine after use and remove ignition key, if provided.
Failure to do so may lead to serious injury or death.
2.
Remove ignition key, if provided (see manufacturer’s
instructions). See Figures 30 and 32.
instructions). See Figures 30 and 32.
NOTE
Removing key will reduce the possibility of unauthorized
starting of the engine while equipment is not in use.
starting of the engine while equipment is not in use.
3.
Be sure fuel valve, if present (see equipment manufac-
turer’s instructions) is in “OFF” position. See Figure 34
on page 16
turer’s instructions) is in “OFF” position. See Figure 34
on page 16
.
.
WARNING
WARNING
WARNING
Figure 30. Ignition Key
Figure 31. Engine Speed Control Positions
Figure 32. Possible Ignition Key Locations
STOP
1. Engine Speed Control
2. “STOP” Position
3. “SLOW” Position
4. “RUN” Range
5. “FAST” Position
3
2
1
5
4
STOP
STOP
STO
P
STOP
STOP