HP Compaq KB-9965 311059-B31 Benutzerhandbuch

The fan baskets house the hot-plug fans that cool the processors and boards. 

 

 

  To maintain proper cooling, at least one fan in each fan basket must be 

operational. 

 

 

  Never remove both hot-plug fans from either system fan basket while the server 

is powered up. Overheating and damage to hardware could result. If the appropriate 

HP software drivers are installed, the operating system software initiates a power shutdown in 

case of overheating. 

To remove the fan basket: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Extend the server from the rack (rack model only). Refer to “Extending the Server from 

the Rack” in this chapter. 

4.  Remove the hot-plug fans. Refer to “Hot-Plug Fans (Processor and I/O)” in this chapter. 

5.  Loosen the thumbscrew that secures the fan basket to the chassis (1). 

6.  Remove the fan basket from the chassis (2). 

 

Reverse steps 1 through 6 to replace the fan basket.