HP Compaq KB-9965 311059-B31 Benutzerhandbuch

To remove the diskette drive: 

1.  Prepare the server for a non-hot-plug procedure. Refer to “Preparing the Server for 

Non-Hot-Plug Procedures” in this chapter. 

2.  Remove the front bezel door (tower model only), and lay the server on its side with the 

access panel facing upward. Refer to “Removing the Front Bezel Door (Tower Model 
Only)” in this chapter. 

3.  Remove the access panel. Refer to “Removing the Access Panel” in this chapter. 

4.  Remove the hot-plug processor fan. Refer to “Hot-Plug Fans (Processor and I/O)” in this 

chapter. 

5.  Remove the hot-plug processor fan basket. Refer to “Fan Basket” in this chapter. 

6.  Disconnect the power and signal cables from the diskette drive. Refer to “Diskette and 

CD-ROM Drive Cables” in this chapter. 

7.  Loosen the thumbscrew on the side of the diskette drive (1). 

8.  Slide the drive back and lift it from the chassis (2). 

 

Reverse steps 1 through 8 to replace the diskette drive.