Epson 10+ Benutzerhandbuch

6. Select the

On Screen Display

option to make changes to these settings:

■ Message

Turn this option off if you don’t want to display the

No Signal

message or the name

of the input source or color mode. Warning messages are still displayed.

■ Background Color

Selects the screen color to display (blue or black) when you press the

A/V Mute

button on the remote control.

■ Startup Screen

Turn on this option to display the Epson logo whenever the projector starts.

7. Select the

Input Signal

option to configure the input signal from your video equipment:

■ Video Signal

(composite or S-video signals only)

Leave this set at

Auto

unless your input source is N-PAL format or the

documentation for your video equipment specifies a setting.

■ Input A

(component and RGB video signals only)

Specifies the format for the video source connected to the Input A ports. Select either

Component

RGB Video

8. Select the

Volume

option to adjust the volume of the projector’s audio system or

speakers connected to the projector’s

Audio

ports.

9. Select the

Language

option to choose the language you want to use for the projector

menus.

Repositioning the Picture

Follow these steps to move the picture to a different position on the screen:

1. Press the

button to display the menu screen.

2. Press the down arrow button on the remote control or the

button on the projector to

highlight the Setting menu. Then press

Select

3. Select the

Screen

option, then select the

Position

option. You see a positioning screen.

4. Use the arrow buttons on the remote control or the

buttons on the

projector to move the image left, right, up, or down.

5. When the image is positioned the way you want it, press the

button to exit.