Epson 10+ Benutzerhandbuch

■

Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. 
Do not use liquid or aerosol cleaners.

■

This product includes a lamp component that contains mercury (Hg). Please consult 
your state and local regulations regarding proper disposal or recycling, and do not place in 
the trash.

■

Unplug the projector during lightning storms or when not in use for extended periods.

■

Don’t place the projector or remote control on top of heat-producing equipment.

■

If you use the projector in a country other than where you purchased it, use the correct 
power cord for that country.

■

Don’t stand on the projector or place heavy objects on it.

■

Don’t use the projector outside of the required temperature range of 41 to 95 °F (5 to 
35 °C). Doing so may cause an unstable display and could lead to projector damage.

■

Don’t store the projector outside of the required temperature range of 14 to 140 °F 
(-10 to 60 °C) or in direct sunlight for long periods of time. Doing so may cause damage 
to the case.

You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the 
front and rear of the projector. The projector may not respond to remote control commands 
under the following conditions:

■

There is an object between the remote control and the IR receiver on the projector.

■

Ambient light is too bright.

■

Certain types of fluorescent lighting are used.

■

Other equipment that emits infrared energy, such as a radiant room heater, is in the 
room.

If you experience problems, try the following:

■

The remote control’s battery may be low on power; replace it.

■

Dim the ambient lighting and/or turn off any fluorescent lights.

■

Close any window coverings and/or move the projector out of direct sunlight.

■

Turn off other equipment that emits infrared energy.