Epson equity 320sx plus Benutzerhandbuch

7. Secure the drive to the bracket with the retaining screw.

Now you can replace the subassembly and the computer’s

cover. See Chapter 5 for instructions.

You need to remove the hard disk drive from the vertical

position in the following cases:

You are replacing the drive

You are adding a second drive (either another hard disk

drive or a diskette drive) in the lower horizontal position.

Follow these steps:

1.

Remove the retaining screw securing the hard disk drive
mounting plate to the subassembly and set it aside.

2. Tilt the hard disk drive slightly to the right and lift it off

the subassembly.

Installing