Polycom RMX 2000 Benutzerhandbuch

•

In a single rack installation, stabilizers should be attached to the rack.

•

In multiple rack installations, the racks should be coupled together.

•

Always make sure the rack is stable before extending a component 

from the rack.

•

You should extend only one component at a time - extending two or 

more simultaneously may cause the rack to become unstable.

•

Before you install the rails, determine the placement of each 

component in the rack.

•

Install the heaviest components on the bottom of the rack first, and 

then work up.

•

Allow the power supply units to cool before touching them.

•

Always keep the rack’s trays and board’s closed when not servicing, 

to maintain proper cooling.

The following precautions should be followed with regards to installation 

of the RMX 2000: 
•

Use a regulating uninterruptable power supply (UPS) to protect the 

RMX 2000 from power surges and voltage spikes, to keep your MCU 

operating in case of a power failure.

•

Place the RMX 2000 on a hard, flat surface such as a desktop or mount 

it on 19” rack.

•

The airflow of the RMX 2000 is from left to right. Be sure that the 

areas in the left and right side of the system are clear for proper 

ventilation.