Philips bclever sv1 Benutzerhandbuch

Press the 

y

Standby button twice to switch off the projector.

–

The Standby indicator starts blinking red.

Wait until the cooling fan has stopped (about 3 minutes after the projector has been put in
Standby) and disconnect the mains lead and all other cables.

When the cabinet is dusty, clean it by gently wiping with a soft cloth.

A chamois leather slightly moistened with water is sufficient for cleaning the housing.

Do not use cleaning agents as they may harm the housing.

When the lens is dirty or dusty, first blow the dust off and then gently wipe with a soft
brush or lens cleaning paper. Never touch the lens with your fingers.

–

The lens is likely to become mouldy if left dirty.

Switch off the projector and wait until the cooling fan has stopped before disconnecting the
projector.

Remove the filter holder from the projector.

Press clamp A, open the holder and remove the filter.

While firmly holding the filter, gently remove any accumulated dust, from the dusty side, with
a vacuum cleaner.

Press clamp A, put the filter back in place and release clamp A. Firmly press the filter edges
in place.

Close the filter holder.

Insert the filter holder into the projector until it clicks in position.

English User guide  bClever SV1