Philips cdr820-17 Benutzerhandbuch
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
Do not open the set as there is a risk of electric shock.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service center.
Laser safety
This unit employs a laser. Only a qualified service person should remove
the cover or attempt to service this device, due to possible eye injury.
will invalidate the guarantee.
Do not open the set as there is a risk of electric shock.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service center.
Laser safety
This unit employs a laser. Only a qualified service person should remove
the cover or attempt to service this device, due to possible eye injury.
Problem
Solution
No power
– ensure that the ON/OFF button is on: the set is in standby mode, press any
key to activate it
– ensure that the power cord is plugged in correctly
No sound
– check the audio connections
– try using a different source on the amplifier
– try using a different source on the amplifier
Remote control does not work
– first select the right source on the remote control
– point the remote control directly at the set
– point the remote control directly at the set
Will not record
– clean the disc
– check if CDR(W) is an unfinalized disc
– check that the disc is recordable and replace if necessary
– the disc is not an AUDIO disc (WRONG DISC)
– check if CDR(W) is an unfinalized disc
– check that the disc is recordable and replace if necessary
– the disc is not an AUDIO disc (WRONG DISC)
Recording is distorted
– make sure the recording level is correct
Recorded tracks do not start or stop
– try another auto track setting
at the correct time or tracks have been – check if there are at least 2.7 seconds silence in between the tracks
merged together
merged together
(analog recording only)
– insert track increments manually with the remote control
20 second pause between recordings
– see “Recording with automatic start“.
Recorded disc does not play
– finalize the CDR(W)
in other standard CD player
– insert the CDRW in a CDRW compatible player
Stops during recording
– use Philips audio CDR(W)s.
– in case recording process is interrupted (power loss, mechanical shock), start
– in case recording process is interrupted (power loss, mechanical shock), start
recording again with a new disc
Missing directories on MP3-CD
– only albums with playable files will be shown
Insert Disc indication
– replace or clean the disc
– insert a CD(RW), label upwards
– wait until the lens has cleared
– insert a CD(RW), label upwards
– wait until the lens has cleared
Use Audio CD indication
– insert a digital audio disc marked with “Digital audio” and the special logo
Check Input indication
– select the correct input
– make sure the digital source is switched on
– make sure the connection cord is properly connected
– make sure the digital source is switched on
– make sure the connection cord is properly connected
Unexpected start of Demo mode
– keep STOP 9 on the set pressed for at least 5 seconds to cancel Demo
(automatic display of recorder features)
mode permanently
Set does not react
– unplug the set, then replug it
Troubleshooting
30
English
xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 30