Philips ct1608-000apmea Benutzerhandbuch

Seite von 43
2
Getting started
If you enter a incorrect PIN code 3 times, your SIM 
card is blocked. To unblock it, you must request the 
PUK code from your operator.
As prompted by the phone at first switch on, set the 
date by pressing the appropriate numeric keys (press 
c
to erase a number), then set the time.
For complete date and time options, see page 13.
The mobile phone detects a SIM card that already 
contains names and a message asks you if you want to 
copy your SIM phonebook onto the built-in 
phonebook. Press 
c
 to cancel or 
,
 to accept.
If you choose not to copy the SIM phonebook at this 
time, you can do it manually at a later date (see 
page 8)
.
Your phone is powered by a rechargeable battery. A 
new battery is partially charged and an alarm will warn 
you when the battery reaches low. If the battery is 
completely flat, it will take 2 or 3 minutes of charging 
for its icon to reappear.
You may lose all your personal settings if you remove 
the battery when the phone is switched on.
1.
Once the battery and battery cover are clipped 
on the phone, plug the connector of the charger 
(supplied with the phone, in the box) into the 
socket at the base of the phone on one end, then 
plug  it  into a  main AC  power  socket  with  easy 
access to the other end.
2.
The battery symbol indicates the state of charge:
- During charging the 4 charge indicators scroll;
it takes around 2.30 hours to fully recharge 
your mobile phone.
- When all 4 bars are steady the battery is fully 
charged and you can disconnect the charger. 
Depending on the network and condition of 
Set date and time
Copy the SIM phonebook
Charge the battery
Philips160_GB_4311 255 63101.book  Page 2  Vendredi, 12. août 2005  9:36 09