Philips hr2700 Benutzerhandbuch
CIeaning
• Switch off and remove the mains plug from the wall
socket before cleaning. Wait for the circular blade
to come to a complete standstill.
to come to a complete standstill.
• Never immerse the basic appliance (i.e. the part
containing the motor) into water or any other
fluid. Do not rinse either.
fluid. Do not rinse either.
• Clean the appliance with a damp cloth immediately
after use, including the circular blade. Do not use
any scouring cleaning materials. Do not clean in a
dishwasher.
any scouring cleaning materials. Do not clean in a
dishwasher.
Attention: the blade is very sharp.
Circular blade
To disassemble the circular blade:
- Fold up the support table (fig. 16). Remove it from
To disassemble the circular blade:
- Fold up the support table (fig. 16). Remove it from
the hinge.
- Rotate the blade lock a quarter turn clockwise
(fig. 17).
When the lock is in a vertical position the circular
blade can be removed (fig. 18).
When the lock is in a vertical position the circular
blade can be removed (fig. 18).
To reassemble the circular blade:
- Rotate the blade lock a quarter turn anti-clockwise.
- Rotate the blade lock a quarter turn anti-clockwise.
When the lock is in a horizontal position the
circular blade is fixed.
Ensure that the blade is safely assembled
before switching on.
circular blade is fixed.
Ensure that the blade is safely assembled
before switching on.
- Replace the support table (fig. 19).
Stop plate
To disassemble the stop plate:
- Turn the control knob anti-clockwise until it stops
To disassemble the stop plate:
- Turn the control knob anti-clockwise until it stops
("Click!") (fig. 20).
- Then take off the stop plate (fig. 21).
To reassemble the stop plate:
- Insert the stop plate, press on lightly and turn the
- Insert the stop plate, press on lightly and turn the
control knob clockwise (fig. 22).
5