Philips hr2860 Benutzerhandbuch

If the ingredients stick to the wall of the wet mill beaker, switch off

the appliance and disassemble the wet mill beaker. Use a spatula to

loosen the ingredients from the wall (Fig. 13).

If the appliance shakes because the food is not evenly distributed,

switch off the appliance and disassemble the wet mill. Distribute the

ingredients evenly in the wet mill beaker, reassemble the wet mill and

screw it onto the motor unit. Then switch on the appliance again.

To use the wet mill beaker as a container, turn it upside down and

put the plastic lid on the wet mill beaker (Fig. 14).

Cleaning the appliance is easiest immediately after use.
Never immerse the motor unit in water.
Do not touch the cutting edges of the blade units when you handle or 

clean them. They are very sharp and you could easily cut your fingers 

on them.
Never clean the motor unit, the accessories and the parts in the 

dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids 

such as petrol or acetone to clean the appliance. 
Note: Parts of the appliance may become discoloured when the appliance is 

 1 

 Unplug the appliance and remove the blender, the dry mill or the 

wet mill from the motor unit. 

  

 Clean the blender, the dry mill or the wet mill in warm water with 

some washing-up liquid and rinse them under the tap.

  

 If necessary, remove the rubber sealing ring from the blender lid 

and rinse it with water.

  

 Clean the motor unit with a moist cloth.

-

-

-

1