Philips mcd290 Benutzerhandbuch

9

Any unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet).

Your system consists of materials which can be
recycled and reused if disassembled by a
specialised company. Please observe the local
regulations regarding the disposal of packaging
materials, exhausted batteries and old
equipment.

●

Do not expose the system, batteries or discs to
humidity, rain, sand or excessive heat (caused by
heating equipment or direct sunlight). Always
keep disc trays closed to avoid dust buildup on
the lens.

●

No objects filled with liquids, such as vases, shall
be placed on the apparatus.

●

No naked flame sources, such as lighted candles,
should be placed on the apparatus.

●

The apparatus shall not be exposed to dripping
or splashing.

●

Install this unit near the AC outlet and where the
AC power plug can be reached easily.

●

The lens may cloud over when the player is
suddenly moved from cold to warm
surroundings, making it impossible to play a disc.
Leave the player in the warm environment until
the moisture evaporates.

●

Do not operate the system in an enclosed
cabinet and allow about 10 cm (4 inches) of free
space all around the player for adequate
ventilation.

      

●

The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers table-cloths, curtains, etc.

●

Use soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.

●

To clean a CD, wipe it in a
straight line from the center
towards the edge using soft
and lint-free cloth. A cleaning
agent may damage the disc.

●

Write only on the printed side
of a CDR(W) and only with a
soft felt-tipped pen.

●

Handle the disc by its edge. Do not touch the
surface.

●

After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.

●

Place the player on a flat, hard, stable surface.

●

Install this unit near the AC outlet and where the
AC power plug can be reached easily.

●

To ensure good recording and playback quality,
clean the head A, the capstan(s) B, and
pressure roller(s) C after every 50 hours of
tape operation.

●

Use a cotton swab slightly moistened with
cleaning fluid or alcohol.

●

You also can clean the head  by playing a
cleaning tape once.

C

B

A

B

C

●

Use a demagnetising tape available at your
dealer.

pg001-pg036_MCD290_98-Eng

2005.11.14, 14:50

9