Philips VR1000 Benutzerhandbuch
— 23 —
Special Effect Playbacks
Are you familiar with tape playback?
If so, you are ready to enjoy the special
effect playback features described
below.
If so, you are ready to enjoy the special
effect playback features described
below.
To view a still picture
Press
PAUSE/STILL
8 briefly during
playback.
Playback is freezed and a still picture
appears.
Playback is freezed and a still picture
appears.
Press the button again to activate
frame-by-frame playback (or press
w2 ¢ button.
frame-by-frame playback (or press
w2 ¢ button.
To resume playback, press PLAY
3.
To advance a still picture:
1 Press
1 Press
JOG/SHTL
so that the
JOG/
SHTL
button lights up.
2 Rotate the jog dial clockwise (or
counterclockwise) to advance (or
reverse) a still picture frame by
frame, while the JOG/SHTL button
lights up.
reverse) a still picture frame by
frame, while the JOG/SHTL button
lights up.
To resume playback, press
PLAY
3.
To view a slow motion picture
Press
PAUSE/STILL
8 for more than
2 seconds during playback.
To decrease the slow motion speed
(and reverse the slow motion
playback), turn the shuttle ring counter
clockwise
(and reverse the slow motion
playback), turn the shuttle ring counter
clockwise
.
To increase the slow motion speed
(and forward the slow motion
playback), turn the shuttle ring clock
wise
(and forward the slow motion
playback), turn the shuttle ring clock
wise
.
To resume playback, press
PLAY
3.
A
DVANCED
O
PERATIONS
Tracking Adjustments
Auto tracking
Each time a tape is inserted, auto tracking
starts working and continuously analyses
the signal to adjust for optimum picture
quality during playback. So, there is no
need for you to minimize noises in most
tapes during playback.
starts working and continuously analyses
the signal to adjust for optimum picture
quality during playback. So, there is no
need for you to minimize noises in most
tapes during playback.
Manual tracking
• During normal playback:
If auto tracking cannot eliminate noises
well during playback, press
well during playback, press
SPEED
on the remote control to engage
manual tracking mode, then press
manual tracking mode, then press
PROGRAMME
(or
PROG.
) + or –.
• During a slow motion picture:
Press
PROGRAMME +/–
on the
front panel or
PROG.
+/– on the
remote control to minimize noises in
the slow motion picture.
the slow motion picture.
To cancel manual tracking, stop the
tape, eject the tape, then re-insert it or
press SPEED during playback.
tape, eject the tape, then re-insert it or
press SPEED during playback.
Index Search
You can locate an index marked at the
beginning of each recording on a tape
recorded on this VCR (or an indexed
tape).
beginning of each recording on a tape
recorded on this VCR (or an indexed
tape).
Press
¢ or 4 repeatedly until the
appropriate number is displayed on the
TV screen before starting play.
Rapid forward or reverse search begins.
When it finds the designated index,
playback starts automatically.
• Locate an index number by pressing
TV screen before starting play.
Rapid forward or reverse search begins.
When it finds the designated index,
playback starts automatically.
• Locate an index number by pressing
the button repeatedly, indicating how
many index marks ahead of or
behind that recording you want is
from the tape’s current position.
many index marks ahead of or
behind that recording you want is
from the tape’s current position.
• Up to ±9th index mark from the
current position on the tape can be
located.
located.
To rapidly locate, then freeze,
a particular scene
a particular scene
During tape playback or Still mode,
follow these steps.
1 Press
follow these steps.
1 Press
JOG/SHTL
so that the JOG/
SHTL button lights.
2 Turn and hold the Shuttle ring
clockwise (or counterclockwise) to
fast forward (or reverse) a picture.
As you turn the ring further, the
search speed increases. You may
only use the Shuttle ring when the
JOG/SHTL button is lit.
fast forward (or reverse) a picture.
As you turn the ring further, the
search speed increases. You may
only use the Shuttle ring when the
JOG/SHTL button is lit.
3 Release the Shuttle ring freezes the
picture in still mode.
Notes:
• No sound comes out during special effect
• No sound comes out during special effect
playbacks.
• If you keep viewing slow motion and still
pictures for 5 minutes, the VCR
automatically stops to protect the tape
and video heads.
automatically stops to protect the tape
and video heads.
• During search, still, or frame-by frame
playback, the picture will be distorted,
and there may be a loss of colour.
and there may be a loss of colour.
• During special effect playbacks, some
noise bars will appear on the TV screen.
• When normal playback resumes from
search, still, slow motion or frame-by-
frame playback, the picture may jitter
vertically momentarily depending on the
type of TV being used.
frame playback, the picture may jitter
vertically momentarily depending on the
type of TV being used.
• When using the jog dial or shuttle ring on
the front panel, you do not have to press
JOG/SHTL on the remote control.
JOG/SHTL on the remote control.
VR1000/07-New
99.7.8, 3:32 PM
23