Pelco EH3512 Benutzerhandbuch
2
Pelco Manual C478M-L (11/03)
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1.
Installation and servicing should only be done by qualified service personnel and con-
form to all local codes.
form to all local codes.
2.
Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-
sure, it is designed for indoor use only and it must not be installed where exposed to
rain and moisture.
sure, it is designed for indoor use only and it must not be installed where exposed to
rain and moisture.
3.
Only use replacement parts recommended by Pelco.
4.
After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.
5.
The installation method and materials should be capable to supporting four times the
weight of the enclosure, pan/tilt, camera and lens combination.
weight of the enclosure, pan/tilt, camera and lens combination.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
and operation.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
tant operating and maintenance instructions
in the literature accompanying this unit.
C A U T I O N :
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
DESCRIPTION
The EH3508/EH3512/EH3515 Series are indoor/outdoor light-duty camera enclosures de-
signed for use with various cameras on the market and accommodate fixed focal length or
motorized zoom lenses, with or without auto-iris operation.
signed for use with various cameras on the market and accommodate fixed focal length or
motorized zoom lenses, with or without auto-iris operation.
The lid of the enclosure is hinged in the front providing easy access during installation and
when camera and lens adjustments are necessary. The camera sled also serves as an el-
evation block. You can remove, flip, and then reinstall the sled to elevate the camera. All wir-
ing and cabling is brought into the enclosure through adjustable glands at the bottom rear
of the enclosure.
when camera and lens adjustments are necessary. The camera sled also serves as an el-
evation block. You can remove, flip, and then reinstall the sled to elevate the camera. All wir-
ing and cabling is brought into the enclosure through adjustable glands at the bottom rear
of the enclosure.
The rear link-lock latch can be used with a padlock of suitable size for applications requiring
additional security.
additional security.
MODELS
EH3508
Enclosure, indoor/outdoor, 8.75-inch (22.23 cm) lower body length. (CE)
EH3508-1
Same as EH3508 except unit is supplied with 120 VAC heater and defroster,
13 watts.
13 watts.
EH3508-2
Same as EH3508 except unit is supplied with 24 VAC heater and defroster,
13 watts. (CE)
13 watts. (CE)
EH3508-3
Same as EH3508 except unit is supplied with 230 VAC heater and defroster,
13 watts.
13 watts.
EH3512
Enclosure, indoor/outdoor, 12.75-inch (32.38 cm) lower body length. (CE)
EH3512-1
Same as EH3512 except unit is supplied with 120 VAC heater, defroster,
and blower, 17 watts.
and blower, 17 watts.
EH3512-1HD Same as EH3512 except unit is supplied with 120 VAC heater and defroster,
13 watts.
EH3512-2
Same as EH3512 except unit is supplied with 24 VAC heater, defroster, and
blower, 15 watts. (CE)
blower, 15 watts. (CE)
EH3512-2HD Same as EH3512 except unit is supplied with 24 VAC heater and defroster,
13 watts. (CE)