Mazda 2009 rx-8 Benutzerhandbuch
3
Seats
To Program the Memory Seat Function:
1
Park the vehicle.
2
Adjust the seat to the desired position using the Slide/Tilt and
Recline switches.
3
While holding the memory seat switch SET button press one of the
three programming buttons until a beep sound is heard. Programming
is now complete. Program the remaining two buttons as desired.
is now complete. Program the remaining two buttons as desired.
To return to the programmed position, close the driver’s door, turn the ignition
ON and press and hold the desired program button while the seat moves to
the programmed position. When the programmed position is reached, a beep
sound will be heard and the button can be released.
ON and press and hold the desired program button while the seat moves to
the programmed position. When the programmed position is reached, a beep
sound will be heard and the button can be released.
Note:
You can also program one seat position for each advanced key/retractable
type key used with the vehicle. See the Owner’s Manual for programming instructions.
ELECTRONiCALLY OPERATED DRiVER SEAT
Slide/Tilt Switch
Push forward or backward to
slide seat bottom. Seat can
also be raised, lowered or
tilted with this control.
slide seat bottom. Seat can
also be raised, lowered or
tilted with this control.
Recline Switch
Push forward or backward
to adjust seatback angle.
to adjust seatback angle.
Lumbar Adjustment
Push switch to
increase or decrease
lumbar support.
increase or decrease
lumbar support.
Memory Seat Switch
164831_09a_RX-8_SSG_081208.indd 4
8/12/08 3:47:50 PM