Mercedes Benz 2004 g-class Benutzerhandbuch

왘

Make sure the gear selector lever is set 
to P.

왘

Do not depress accelerator.

왘

Turn SmartKey in the starter switch to 
position 3 and hold until the engine 
starts (

컄

page 33).

왘

Depress the brake pedal.

The gear selector lever lock is released.

For information on turning off the engine, 
see “Turning off engine” (

컄

page 52).

If the engine does not start as described, 
carry out the following steps:

왘

Turn SmartKey in starter switch to 
position 0 and repeat starting proce-
dure. 

왘

Remember that extended starting at-
tempts can drain the battery.

왘

Get a jump start (

컄

page 313).

If the engine does not start after several 
starting attempts, there could be a mal-
function in the engine electronics or in the 
fuel supply system.

왘

Notify an authorized Mercedes-Benz 
Light Truck Center.

1 Lever

2 Button

i

You can also use the “touch-start” 
function. Turn the SmartKey to 
position 3 and release it again immedi-
ately. The engine then starts automati-
cally.

G

When leaving the vehicle, always remove the 
SmartKey from the starter switch, and lock 
the vehicle.

Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle. 
Children could release the parking brake, 
which could result in an accident and/or se-
rious personal injury.