Dolmar PS-7910 Benutzerhandbuch

27

spark plug (see "Replacing the spark plug"). Always wear 

The chain needs sharpening when:
The  sawdust  produced  when  sawing  damp  wood  looks  like 

wood flour.
The chain penetrates the wood only under great pressure. 
The cutting edge is visibly damaged.
The saw is pulled to the left or right when sawing. This is caused 

by uneven sharpening of the chain.
Important: Sharpen frequently, but without removing too 

much metal!
Generally, 2 or 3 strokes of the file will be enough.
Have the chain resharpened at a service center when you have 

already sharpened it yourself several times.

this saw (see the Extract from the spare-parts list)!
All cutters must be of the same length (dimension a). Cutters 

with different lengths result in rough running of the chain and 

can cause cracks in the chain.
The minimum cutter length: 0.11"(3 mm). Do not resharpen the 

chain when the minimum cutter length has been reached; at 

this point, the chain must be replaced (see the Extract from the 

spare-parts list and "Replacing the saw chain").
The depth of the cut is determined by the difference in height 

between the depth limiter (round nose) and the cutting edge.
The  best  results  are  obtained  with  a  depth-limiter  depth  of  

.025" (0.64 mm).

CAUTION: Excessive depth 

(0.64 mm)

(0.64 mm)

(only on “H” model saws)
The electrically heated handles are activated by pushing the 

switch (11).

On:  red marking on switch visiable

Off:  red marking on switch not visiable