caddx nx-6 Handbuch
5
UNDERSTANDING THE LIGHTS
Armed Light
The
armed light
is “on” when the system is armed. The
armed light
is “off”
when it is disarmed. The
armed light
will flash when there has been an alarm
during the previous arm cycle.
Bypass Light
The
bypass light
is “on” when any zone in this keypad’s partition is bypassed.
The zone(s) that is bypassed will also be illuminated. If the
bypass light
is “off”,
no zones are bypassed.
Cancel Light
The
cancel light
will flash during an abort delay time. If a code is entered
followed by the [CANCEL] key while this light is flashing, all abortable reports
will stop the communication process. Note: The abort feature must be
enabled. Entering a code followed by the [CANCEL] key during or after an
alarm report to the central station will cause the
will stop the communication process. Note: The abort feature must be
enabled. Entering a code followed by the [CANCEL] key during or after an
alarm report to the central station will cause the
cancel light
to come on. It will
stay on until the central station has received the cancel report. Note: The
cancel feature must be enabled.
cancel feature must be enabled.
Chime Light
The c
hime light
is “on” when the chime feature is “on”; “off” otherwise.
Exit Light
The
exit light
is “on” during the exit delay. Please note that the light will flash
during the last 10 seconds of the exit delay as a warning that the time is
running out. (The user may want to disarm the system if the
running out. (The user may want to disarm the system if the
exit light
is
flashing in order to prevent an alarm. The user may then re-arm the system
and exit before the delay expires.)
and exit before the delay expires.)
Fire Light
A steady
fire light
means a fire zone has been faulted. A rapidly flashing
fire
light
means that a fire zone is in a trouble condition.
Instant Light
The
instant light
is “on” when there is no delay on your entry/exit door(s). Any
time the
instant light
is “on” and the exit delay has expired, the opening
of an entry/exit door will produce an immediate alarm. The
instant light
can
be toggled on or off by pressing the [Stay] key while the system is armed.
When the
When the
instant light
is “off”, the entry/exit door(s) is delayed.
Power Light
The
power light
is on if the primary power is on. The
power light
will flash if the
system has a low battery condition.