Cannondale diagnostic tool Benutzerhandbuch

© 2001 Cannondale Corporation - All Rights Reserved

16

Cannondale Diagnostic Tool Manual.fm

4.  Type in the values in the corresponding fields and click “OK.” The new values will display in the main

screen.

5.  Now, you have to send these values to the ECU for them to take effect. Click the “SEND Calibration File

(to ECU)” button.

Whenever data is being transferred between the vehicle ECU and PC a progress indicator displays in
the upper right area of the main screen.    

Data transfers should take no more than 1 minute. If the progress indicator freezes for a long time, close
the Cannondale Diagnostic Tool software and try again making sure the cables are connected properly
and that the vehicle battery is fully charged.

Data is transferred between the vehicle and PC in small “packets” or chunks. During the transfer
process, checks are performed by the diagnostic tool (software) to ensure that the data is not damaged
during the transfer. Each small packet is checked during the transfer. If data errors are detected in the
packet the message “Retrying Checksum...” will display in the progress indicator: 

Typically, this is due to electrical “noise” or other interference during the process. The diagnostic tool will
keep trying automatically.

The Cannondale logo in the top right corner of the main menu is a link to the Cannondale Tech Center
website. The site includes all factory issued calibration files. The file can be downloaded via the link.
Follow the link for more details.