MINOLTA magicolor 2 Benutzerhandbuch
Introduction
QMS magicolor 2 Op
eration
2-2
Introduction
This chapter covers basic printer operation, such as loading paper,
transparencies, labels, and envelopes; and replacing toner cartridges.
transparencies, labels, and envelopes; and replacing toner cartridges.
Loading the Media Cassette
Prepare the Paper
1
Take a stack of about 250 sheets (½ ream).
»
Note:
Don’t unwrap the paper above the printer as this might
cause paper particles to fall into the printer.
2
Holding the stack with one hand, fan the paper with the other.
This gets air through the sheets and prevents static buildup.
3
Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.
Load the Cassette
1
Remove the media cassette from the printer.
2
Adjust the media guides to fit the size paper you’re loading.
Squeeze the retainers at the ends of the left width guide and/or
the length guide, move the guide to the appropriate location
(media sizes are listed on the cassette), and release the retainers.
the length guide, move the guide to the appropriate location
(media sizes are listed on the cassette), and release the retainers.