Cadillac sts 2005 Benutzerhandbuch
As light shines out from the HUD, it is possible for light
to shine back in. In rare occurrences, when the sun
is at a specific angle and position, the sun’s rays can
shine back into the HUD. When this occurs, the display
device within the HUD will be temporarily illuminated.
The event will end when the vehicle’s angle to the
sun changes.
to shine back in. In rare occurrences, when the sun
is at a specific angle and position, the sun’s rays can
shine back into the HUD. When this occurs, the display
device within the HUD will be temporarily illuminated.
The event will end when the vehicle’s angle to the
sun changes.
Clean the inside of the windshield as needed to remove
any dirt or film that reduces the sharpness or clarity
of the HUD image.
any dirt or film that reduces the sharpness or clarity
of the HUD image.
To clean the HUD, spray household glass cleaner
on a soft, clean cloth. Wipe the HUD lens gently, then
dry it.
on a soft, clean cloth. Wipe the HUD lens gently, then
dry it.
Notice: When cleaning, be careful not to
scratch the HUD or camera lenses. Do not spray
glass cleaner directly on the HUD lens because
the cleaner could leak inside the unit and
cause damage.
scratch the HUD or camera lenses. Do not spray
glass cleaner directly on the HUD lens because
the cleaner could leak inside the unit and
cause damage.
If the ignition is on and you cannot see the HUD image,
check to see if:
check to see if:
•
Something is covering the HUD unit.
•
The brightness is adjusted properly.
•
The HUD image is adjusted to the proper height.
•
Ambient light in the direction your vehicle is facing
is low.
is low.
•
A fuse is blown. See Fuses and Circuit Breakers on
page 5-93.
page 5-93.
Keep in mind that your windshield is part of the HUD
system. If you ever have to have your windshield
replaced, be sure to get one that is designed for HUD
or your HUD image may look blurred and out of focus.
system. If you ever have to have your windshield
replaced, be sure to get one that is designed for HUD
or your HUD image may look blurred and out of focus.
The following Adaptive Cruise Control message may
appear in the HUD:
appear in the HUD:
PEDAL APPLIED ACC OVERRIDE: This message
indicates that you are pressing your foot on the
accelerator pedal and overriding Adaptive Cruise
Control. While you are doing this, the system will not
automatically apply the brakes. Once you remove your
foot from the accelerator pedal, Adaptive Cruise
Control will return to normal operation and be able to
apply the brakes, if needed.
indicates that you are pressing your foot on the
accelerator pedal and overriding Adaptive Cruise
Control. While you are doing this, the system will not
automatically apply the brakes. Once you remove your
foot from the accelerator pedal, Adaptive Cruise
Control will return to normal operation and be able to
apply the brakes, if needed.
You may also see an Adaptive Cruise Control
active symbol, alert symbol or vehicle ahead
symbol. See Adaptive Cruise Control on page 3-19
for more information.
active symbol, alert symbol or vehicle ahead
symbol. See Adaptive Cruise Control on page 3-19
for more information.
3-43