Gary Fisher 2004 gary fisher bicycles Benutzerhandbuch

Seite von 90
44
45
CHAPTER THREE 
Inspection, Adjustment & Lubrication
DualDrive shift system
The DualDrive shift system combines an internal 
shift hub with an external derailleur shifting 
system, consisting of those parts of the bicycle 
which allow you to shift gears including the shifter, 
rear hub, cassette, rear derailleur, and shift cables. 
The derailleur portion of the DualDrive system is a 
regular rear derailleur, explained on pages 35-39. 
These instructions explain how to inspect, adjust, 
and lubricate the internal-shifting rear hub portion 
of the DualDrive shift system with its two-position 
thumb shifter (Figure 3.5.7).
Inspection
A properly adjusted shift system is quiet. If an unusual noise 
follows any shift, or while pedaling, your shift cable may need 
to be adjusted. If after adjustment the noise persists or grows 
louder, stop the bicycle and try to locate the noise. If necessary, 
ask your Gary Fisher dealer to identify and correct any 
problems. For more information about your shift system consult 
your Gary Fisher dealer.
Once a month,
 make sure the hub gears are properly 
adjusted. Push the shifter from Uphill mode to Standard mode, 
then back again. If the hub does not shift smoothly in both 
directions, either follow the instructions to adjust the shifting 
or take your bicycle to your Gary Fisher dealer for 
service. 
Once a month
, check the shift cable for kinks, 
rust, broken strands, or frayed ends. Also check the 
housing for bent ends, cuts, broken coils and wear. 
If you suspect a problem with your shift cable, 
do not ride your bicycle. Replace the cable and/or 
housing before riding your bicycle by following 
these instructions, or take your bike to your Gary 
Fisher dealer for service.
Adjustment
To adjust the rear hub shifting
1. Place the shifter in the Standard mode.
2. Align the indicator on the Clickbox window (Figure 3.5.8) by 
rotating the barrel adjuster.
4. Shift to Uphill mode, then back to Standard mode, and re-
check the adjustment.
Figure 3.5.7  DualDrive shifter
Thumb 
shifter
Mode indicators
(Uphill)
Figure 3.5.8  Clickbox (found on 
rear hub)
Barrel adjuster
Indicator window
Internal Shift Systems