Runco crystal cx-70dhd Benutzerhandbuch
CX-70DHD Installation/Operation Manual
33
PRE
L
IMINAR
Y
4.1
Turning on the Power
Turning on the Power
1. Turn on your source components.
2. Press the main power switch on the CX-70DHD (see Figure 2-1). The standby/on
indicator lights red.
3. Set the main power switch at the rear of the DHD Controller (see Figure 2-4) to the “on”
position.
4. Press the ON button on the remote control to
turn on the DHD Controller and CX-70DHD (or
press the power button on the front of the DHD
Controller). The power indicator on the DHD
Controller lights solid blue.
press the power button on the front of the DHD
Controller). The power indicator on the DHD
Controller lights solid blue.
5. After a brief warm-up period, the CX-70DHD
will display an image.
4.2
Setting the Computer
Display Properties
Setting the Computer
Display Properties
To maximize image quality when using the CX-70DHD with a personal computer, you may
need to adjust the display properties of your computer’s video card. To do this on a
Microsoft® Windows®-based PC:
need to adjust the display properties of your computer’s video card. To do this on a
Microsoft® Windows®-based PC:
1. Choose Settings from the Windows Start
Menu and click on “Control Panel.”
4. Operation