Dakota Digital lat-nr372 Benutzerhandbuch
INSTALLATION INSTRUCTIONS
LAT-NR372
LED Tail Lights for 1969 Mustang
MAN#650206
Kit Includes:
Installation:
69
Mustang
1. Remove light bulb socket from the back of the tail light housing.
2. Remove the light bulb from socket.
3. Remove tail light housing from vehicle.
4. Pull the tail light/body seal off the housing carefully working it around the trim ring and over the
2. Remove the light bulb from socket.
3. Remove tail light housing from vehicle.
4. Pull the tail light/body seal off the housing carefully working it around the trim ring and over the
lens.
5. Remove the 6 screws that hold the lens and lens trim.
6. Remove the lens and trim from the housing.
7. Loosen the lens seal from the housing by gently pulling the seal away from the housing.
6. Remove the lens and trim from the housing.
7. Loosen the lens seal from the housing by gently pulling the seal away from the housing.
8. Clean dirt and rust from the seal surface of the housing. Now is also a good time to clean the
lenses. If the lenses are in bad shape, a replacement set is recommended.
MAN#650206