Daewoo sd-8800p Benutzerhandbuch
52
Before suspecting a fault (VCR)
•
“Power On” does not work.
•
It does not work even in “Power On”.
•
A videotape is not inputted in.
•
On inputting a videotape, the tape is
re-ejected.
re-ejected.
•
A videotape is not ejected.
•
A channel on video and a play screen
does not appear.
does not appear.
•
Noise (screen noise) appears on
screen.
screen.
•
Noise appears on screen after
recording.
recording.
•
During playback, noise appears.
•
Sound and picture are poor.
•
Sound comes out but picture does not
appear.
appear.
•
Picture is irregular and stripes appears.
•
"Picture Error" message is displayed
on the screen.
on the screen.
•
While recording and playing, the top
of screen waves.
of screen waves.
•
The picture is not clear.
•
A picture at pause is trembling or
slow screen is not clear.
slow screen is not clear.
Checks
Symptom
➤
Please check whether the power plug is inserted in an electric outlet.
➤
Please check whether a videotape is inserted in.
➤
Try to insert the plug again.
➤
Please check whether a power plug is inserted in an electric outlet.
➤
Please check whether a videotape is in.
➤
Please check whether a videotape is inserted in a right direction (If
the machine won’t allow you to insert a tape, the side of transparent
window should be on the upside)
the machine won’t allow you to insert a tape, the side of transparent
window should be on the upside)
➤
Have you inputted a videotape again just after the tape was ejected?
Please try it again after fully ejecting it.
Please try it again after fully ejecting it.
➤
It may not be in squarely. For correct operation you must insert the tape smoothly.
➤
That’s why a safe mode to protect a videotape is operated
automatically. Please pull out the tape and input it again.
automatically. Please pull out the tape and input it again.
➤
In case the product is not used for a long time, a videotape may not be
ejected because the film inside may be stretched. In this case, please pull
out a power plug for about 10mins and then press the “EJECT” button.
ejected because the film inside may be stretched. In this case, please pull
out a power plug for about 10mins and then press the “EJECT” button.
➤
Please check your antenna’s connection.
➤
TV channel should be stored on video channel.
➤
Please check your antenna’s signal whether it may be weak. If it is weak,
please use an (RF) radio frequency amplifier connected with the device.
please use an (RF) radio frequency amplifier connected with the device.
➤
Press “TV/VCR” and then ensure “VCR” is displayed on the display panel.
➤
Check if VCR, was it turned on?
➤
While in recording a program, do you watch another channel?
➤
Select TV by pressing [TV/VCR] button on remote control.
➤
While in playing a videotape, there may be some noise or blot in the
part of the beginning of a videotape or resuming “PAUSE”. This is
not a fault.
part of the beginning of a videotape or resuming “PAUSE”. This is
not a fault.
➤
Please press “TRACKING” for better screen. Videotape may be
poor. Try to change it to another one.
poor. Try to change it to another one.
➤
Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
contaminated.
➤
Since VCR Play signals are not stable like a TV signals, screen may
be unstable or curved while playing. This normally occurs on older
TV’s which may have a specific channel for VCR playback.
be unstable or curved while playing. This normally occurs on older
TV’s which may have a specific channel for VCR playback.
➤
If videotape is the one recorded by other products or old one, stripe
may appear on the screen.
may appear on the screen.
➤
Try to adjust the picture by [TRACKING+/-] button
➤
Try to use a head-cleaner.
➤
Try to use a head-cleaner.
➤
Try to adjust the screen by [TRACKING+/-] button.
53
Before suspecting a fault (VCR)
•
Recording a TV program is
impossible.
impossible.
•
Once pressing “REC”, a videotape is
ejected automatically.
ejected automatically.
•
Timer recording of Cable TV does
not work.
not work.
•
In spite of pressing “CHANNEL”, a
channel can not be set.
channel can not be set.
•
While duplicating, screen is not
clean and distorted.
clean and distorted.
•
remote control does not work.
•
Buttons on remote control do not
work.
work.
•
VISS index search does not work.
•
Cable broadcasting can not be
selected.
selected.
Checks
Symptom
➤
For recording, you should use a videotape with a tab.
➤
Please check whether a channel is fixed on video. If not, you have to
turn it into “TV” by pressing “INPUT” button.
turn it into “TV” by pressing “INPUT” button.
➤
Please check whether the timer recording info is right.
➤
Are RF cables in the antenna connection terminal correctly?
➤
Does a CH number selected in display section appear?
➤
Please check a tab on a tape whether it is broken or not. (If it was
broken, please replace with some adhesive tape)
broken, please replace with some adhesive tape)
➤
Please check whether the clock is right.
➤
Does the display on your video show “
” (Ready for timer
recording)?
➤
Please check whether the timer recording info is right.
➤
Please check a tab on a tape whether it is broke or not. (If it is broken,
please replace with some adhesive tape)
please replace with some adhesive tape)
➤
Was the cable data output code connected correctly?
➤
Was the cable box setup and output channel right?
➤
Did you enter a password? (Please cancel it.)
➤
Did you turn off your player? (Please turn it on.)
➤
You may not have memorized your channels.
➤
Please check your channel setting or press a number button.
➤
Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
➤
Battery may be weak or exhausted.
➤
Are you using the correct remote.
➤
In case a videotape is positioned at the beginning, “VISS REW” and
“REW” do not work.
“REW” do not work.
➤
In case a videotape is positioned at the end, “FF”, “VISS FF”, “PLAY”
and “REC” do not work.
and “REC” do not work.
➤
Please check whether another button is pressed.
➤
Are you playing a tape that is not recorded in this recorder? (Try and
record it with the recorder.)
record it with the recorder.)
➤
You may start recording it in “REC-PAUSE”. Please start recording it
from stop condition.
from stop condition.
➤
Please select “CABLE” not “NETWORK” from the “CHANNEL
SETTING”.
SETTING”.
The
others