Hitachi 35tx59k, 35tx50b, 35tx30b Benutzerhandbuch

 

11

Most video/audio connections between components can be made with shielded video 
and audio cables that have phono connectors. For best performance, video cables 
should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores 
that sell audio/video products. Below are illustrations and names of common 
connectors. 
Before purchasing any cables, be sure of the output and input connector types required 
by the various components. Also make sure the cables are the correct length. 

  

 

Connector 
This outdoor antenna cable must be  

 

For connecting RF signals (antenna or 

cable 
connected to an antenna adaptor  

TV) to the antenna jack on the television. 

(300-Ohm to 75-Ohm). 

 

 

 

Used on all standard video and audio    

This connector is used on camcorders, 

VCRs, 
cables which connect to inputs and outputs  

and laser disc players with an S-Video 

feature 
located on the Television's front and rear  

in place of the standard video cable to 

produce 
jack 

panels. 

    a 

high-quality 

picture.