GMC savana 2000 Benutzerhandbuch

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.

To signal a turn, move the lever all the way up 
or down. When the turn is finished, the lever will 
return automatically.

An arrow on the instrument
panel will flash in the
direction of the turn 
or lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

As you signal a turn or a lane change, if the arrows flash
at twice the normal rate, a signal bulb may be burned
out and other drivers may not see your turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned

-

out bulbs and a blown

fuse (see “Fuses and Circuit Breakers” in the Index).

To change the headlamps from low beam to high or high
to low, pull the multifunction lever all the way toward
you. Then release it.

When the high beams are
on, this light on the
instrument panel 
also will be on.